Skip to content

FAQ

Roof and concrete questions, answered plainly

Most questions come back to the same principle: we inspect and photograph the condition first, then recommend the pathway it calls for, in writing. Below are the general questions, then the questions for each service.

  • Free inspection
  • Every finding photographed
  • Written scope, system named

Getting started

General questions

Something not covered here? Call Daniel or request a free inspection and ask on site.

How do I book a free inspection?

Use the inspection request form on this site or call 0468 029 068. Tell us what you are seeing and where the property is, and we will arrange a time. We inspect accessible areas, photograph what we find and explain the pathway in writing.

What happens at the inspection?

We look at the condition of the roof or concrete, photograph the findings and talk you through what they mean. You then receive a written scope with the recommended pathway, the inclusions and exclusions, and the system named. A visual check of accessible areas is not an engineering inspection and does not guarantee every concealed defect is found.

Do you give prices over the phone?

No. The price depends on the pathway and the pathway depends on the condition, so we inspect first. A number given without seeing the roof or slab is a guess, and a guess tends to change once work starts.

What areas do you cover?

We are based in Gosford and work across the Central Coast, Lake Macquarie, Newcastle and Sydney. If you are near one of those areas but not sure you are covered, call and ask.

Can you look at my roof and my driveway at the same visit?

Yes. One inspection can cover both, and the scope can bring them together so there is one schedule and one team accountable for the whole job.

What if something unexpected is found once work starts?

We stop, photograph it and send a written variation. Nothing proceeds without your approval. On a roof replacement this includes anything found after strip-off, such as structural defects, asbestos or solar and electrical conflicts, which are managed through the licensed trade or engineering advice.

Who will I deal with?

SOAKD Roof & Concrete is led by Daniel, founder of SOAKD and director, who leads technical roof diagnosis and quoting. The person who diagnoses your roof can deliver or supervise the work.

Questions by service

Roof Restoration

  • What is included in a roof restoration?

    A restoration starts with the repairs the roof actually needs - replacing broken tiles where suitable replacements are available, rebedding and repointing ridge and hip caps, and addressing flashings and fixings. The roof is then prepared, dried, primed and coated with a named system. The written scope lists every inclusion and exclusion before work starts.

  • How do I know if my roof should be restored or replaced?

    It depends on condition, not age alone. Widespread tile breakage, a roof that is sagging, failing battens or a roof that contains asbestos usually point to replacement. A roof with sound tiles and failed pointing or coating is usually a restoration candidate. Our inspection photographs the condition and the scope states which pathway it supports.

  • Can you restore a roof that has solar panels on it?

    Yes, but the panels decide how. Panels are either masked in place or temporarily removed and reinstalled by a licensed electrician, depending on the system and the access needed. We do not spray near an unprotected array, and we will not spray at all if overspray cannot be controlled.

  • Do you restore metal and COLORBOND® roofs as well as tile roofs?

    Yes. On metal roofs the repair stage covers corroded or loose fixings, rust treatment, and flashings and sealant at penetrations before the roof is prepared and coated. Where corrosion has gone through the sheet, the scope says the sheet needs replacing rather than coating.

Roof Restoration in detail

Roof Painting

  • How much does roof painting cost?

    It depends on the roof's size and pitch, its height and access, the roof material, how much preparation the surface needs, the coating system and number of coats, and how much masking the site calls for. Two quotes for the same roof can differ because one includes primer or solar protection and the other does not. We price after a free inspection, and the quote names every inclusion so you can compare like with like.

  • Is roof painting the same as a roof restoration?

    No. Painting puts a new finish on a roof that is already sound. A restoration repairs the roof first, replacing broken tiles, rebedding and repointing ridge caps and dealing with flashings, and then coats it. If our inspection finds repairs the roof needs, we tell you, and the job is quoted as a restoration so nothing is coated over.

  • Can you paint a metal or COLORBOND® roof?

    Yes, where the sheets are still sound. Preparation on metal deals with chalking and surface rust, and the primer has to suit the metal and its existing finish. Where corrosion has gone through a sheet, paint will not fix it. The scope will say that sheet needs replacing before the roof is coated, which makes the job a restoration rather than a repaint.

  • Do heat reflective roof coatings work?

    They are formulated to reflect more of the sun's heat than a standard finish, and lighter colours generally reflect more than darker ones. How much difference you notice inside depends on your insulation, roof ventilation, the colour chosen and the home itself. We show you the manufacturer's published information for any system we propose rather than promise a temperature result of our own.

Roof Painting in detail

Roof Repairs

  • How much does roof repointing cost?

    It depends on the length of ridge and hip line, whether the bedding underneath has failed, the roof's pitch and height, and the access needed. Repointing alone is less work than rebedding and repointing, but repointing over cracked bedding does not hold the caps in place. The quote states which repair each ridge needs, by length, with photographs, after a free inspection.

  • Why is my ceiling stain not where the leak is?

    Water rarely drops straight down. It enters at a cracked tile, a ridge joint or a flashing, then runs along tiles, battens, sarking or framing before it finds a place to drip. The stain shows where the water landed, not where it got in. That is why we trace the path back on the roof before we repair anything.

  • What is the difference between rebedding and repointing?

    Bedding is the mortar bed the ridge and hip caps sit on. Pointing is the flexible compound applied over the bedding to seal the joint and allow for movement. Repointing replaces the top layer only. Rebedding lifts the caps, lays a new bed and refixes them, then repoints. Which one a roof needs depends on whether the bedding underneath is still sound.

  • Can you repair a metal roof?

    Yes. Metal roof repairs usually involve replacing loose or corroded fixings, resealing laps and penetrations, repairing or replacing flashings and treating surface rust. A sheet that has rusted through is replaced rather than patched. Where corrosion is spread across most of the roof, we say so and set out whether a recoat or a replacement is the honest pathway.

Roof Repairs in detail

Roof Replacement

  • How much does a roof replacement cost?

    It depends on the roof's size, pitch and height, the material coming off and the material going on, access, the condition of the battens and sarking, whether asbestos is present, whether gutters and flashings change, and whether solar panels need removing. Part of the structure cannot be seen until strip-off, so the quote states its assumptions and what happens if they prove wrong. We price after a free inspection.

  • Can you replace a tile roof with COLORBOND® or another metal roof?

    In most cases, yes. A metal roof is lighter than tile, but the change is planned as a whole. Battens usually change to suit the sheet, the sarking or insulation under the new roof is specified, and ridges, flashings, valleys and sometimes gutters change with it. We will tell you if your project may need approvals. Check with your council.

  • What happens if you find asbestos?

    If the inspection or the strip-off identifies material that may contain asbestos, work in that area stops. We do not remove asbestos ourselves. It is assessed and managed through an appropriately licensed asbestos professional before roof work in that area continues. If it is known up front, the quote states how it will be handled. If it is found later, you receive a written variation.

  • What is the structure hold point?

    Once the old roof covering is off, the battens, the frame and the sarking are exposed for the first time. We stop and check them before anything new goes on, photograph what we find and record it. Any defect is managed through the licensed trade, engineering advice or a written variation before work continues. Nothing proceeds without your approval.

Roof Replacement in detail

Emergency Make-Safe

  • What is a roof make-safe?

    A make-safe is temporary work that reduces hazards and limits water entry while the permanent repair is planned. Depending on the damage and the conditions, it can include covering the damaged area with a tarp or temporary sheet, refixing or removing loose tiles and sheets, and clearing a blocked valley or gutter. It is temporary and does not certify that the roof is structurally sound or permanently watertight.

  • How soon can you get to me?

    Call 0468 029 068 and we will tell you honestly when we can attend, based on the weather, whether the roof can be accessed safely and the other storm calls at the time. We do not promise a time we cannot keep. If water has reached anything electrical, call a licensed electrician. If anyone is in danger, call 000.

  • Will my insurer accept your report?

    We cannot speak for your insurer. Your insurer may ask for photographs and a report, so the make-safe report records the damage found, the work done, the photographs and the permanent repair we recommend. Check your policy and ask your insurer what they need from you. When the permanent repair goes ahead is your decision.

  • Is a make-safe the same as a repair?

    No. A make-safe is temporary. It is done to reduce hazards and limit water getting in, often in poor conditions and with limited access. The permanent repair is diagnosed and quoted separately, in writing, once the roof can be properly inspected. Depending on the damage and the roof's condition, that may be a repair, a restoration or a replacement.

Emergency Make-Safe in detail

Concrete Resurfacing

  • Is spray-on concrete just paint?

    No. Spray-on concrete is a cementitious overlay, a thin cement-based layer with a resin added for bond and flexibility, applied over a prepared slab and then sealed. Paint is a thin film that changes the colour only. Both have a place, but they are different systems, and our quote names which one you are getting. A painted surface is never described as a resurfacing overlay.

  • Can you resurface a driveway that has cracks in it?

    It depends on the crack. Hairline shrinkage cracks are usually stable and can be treated before resurfacing. Cracks along control joints are carried through the new surface rather than covered. Cracks that have a lip, are widening or sit over a sunken section show the slab is moving, and an overlay laid over movement will crack again. Those slabs need repair or replacement first.

  • What is the difference between resurfacing and sealing?

    Resurfacing adds a new wearing layer over the existing concrete, with its own texture and colour. Sealing applies a clear or tinted coat that protects the surface you already have from staining and water. A resurfacing overlay is normally sealed as its final step. Sealing on its own suits concrete whose surface is still in good condition, including most exposed aggregate.

  • Do you offer slip-resistant coatings?

    Yes. Slip resistance comes from texture in the overlay or an additive in the sealer, and it is planned for slopes, steps, pool surrounds and paths that are often wet. More grip usually means a surface that holds more dirt, so we talk through where it matters on your site. The quote states the texture or additive and exactly where it is applied.

Concrete Resurfacing in detail

Concrete Restoration

  • Why did my sealed driveway go white or start peeling?

    Usually because of what was under the sealer. Whitening is often moisture trapped beneath the film, from a slab that was not dry when it was sealed. Peeling often means the new sealer was not compatible with an old one, or the surface was not prepared to take it. Either way, the failed sealer is removed before resealing rather than coated over.

  • Can you repair cracks in a concrete driveway?

    Yes, but the repair depends on the crack. Hairline shrinkage cracks are usually stable and can be filled or sealed over. Cracks at control joints are resealed with a flexible sealant. Cracks with a lip or a widening gap show movement, so the cause is investigated first, and a slab that is still moving may need replacing rather than repairing.

  • How often should exposed aggregate be resealed?

    There is no single interval that suits every driveway. It depends on the sealer type, the sun, the traffic and how close the property is to the coast. Watch for water no longer beading, the colour turning dull or chalky, and sealer wearing or peeling in the wheel tracks. A failed sealer is removed before a compatible new one is applied.

  • Will the repairs be visible after restoration?

    Usually, to some degree. Patching in an existing slab rarely matches the surrounding concrete exactly, especially on plain grey concrete or exposed aggregate. A tinted sealer or colour coat can even out the look on suitable surfaces. We tell you before work starts how visible the repairs are likely to be, so the finish matches what you expected.

Concrete Restoration in detail

Concrete Driveways & Paths

  • What is included in a new concrete driveway?

    The scope covers design, removal of any old slab, subgrade and base compaction, formwork, reinforcement, a recorded pre-pour check, the pour and finish, control and expansion joints, curing and, where included, the sealer or coating. The written quote lists every inclusion and exclusion, the concrete mix and the finish, so you can compare it line by line with any other quote.

  • Should I choose exposed aggregate or plain concrete?

    Neither suits every driveway. Exposed aggregate shows the stones in the mix, hides wear and tyre marks well and needs periodic resealing to keep its look. Plain broom-finished concrete is simpler and gives good grip but shows stains more readily. The choice depends on the look you want, how the driveway is used and how much upkeep you are prepared for.

  • Do I need council approval for a new driveway?

    Possibly. Your council may require approval for a driveway crossover, the section between your boundary and the road, and for any change to the kerb. Requirements differ between councils and sites. We flag it at the design stage so the approval is part of the plan, and the quote states what is needed and who is arranging it.

  • Can a new driveway be coated straight after it is poured?

    No. New concrete has to cure first, gaining strength and giving up moisture, before a sealer or coating will bond properly. How long that takes depends on the mix, the thickness and the weather. Coating readiness is a recorded hold point in our process, so the coat goes on when the slab passes its moisture check, not on a set date.

Concrete Driveways & Paths in detail

Free inspection

Request a free inspection

Tell us what you are seeing. We inspect accessible areas, photograph what we find and explain the pathway the condition calls for before any price is discussed.

  1. 1

    Tell us what you are seeing

    Two minutes. Roof, concrete or both.

  2. 2

    We inspect and photograph

    Accessible areas, every finding photographed.

  3. 3

    You get the pathway in writing

    Repair, restore, replace or build new, with the system named.

Storm damage or water coming in now?

0468 029 068

One number for inspections, quotes and make-safes.

Free inspection

What would you like us to look at?

What would you like us to look at? (required)

Prefer to talk? 0468 029 068

Free inspection