Concrete Solutions That Impress.
Concrete driveways, restoration and protective coatings
SOAKD Roof & Concrete designs and installs new concrete driveways, paths and slabs, restores and seals existing concrete, and finishes suitable surfaces with resurfacing and protective coating systems. We diagnose the slab first and every quote names the actual system being installed.
- Free inspection
- Every finding photographed
- Written scope, system named
Concrete services
Build new, restore or resurface
Concrete gets sold the same way roofs do: one trade, one product. A cleaner cleans and seals. A concreter pours and leaves. A coater coats whatever is in front of them. Nobody diagnoses the slab.
We start with the surface: contamination, porosity, cracking, previous coatings, moisture and movement. Then we recommend the pathway, from a repair and reseal through resurfacing to a new pour, and we name the system on the quote.
-
Concrete Resurfacing
Surface diagnosed, prepared and moisture-checked, then an overlay, coating or sealer applied by name, with walls, cars and gardens masked.
See how we do it -
Concrete Restoration
Cracks and spalls repaired, contamination and failed sealer dealt with, moisture checked, then the slab recoloured where suitable and sealed with a named system.
See how we do it -
Concrete Driveways & Paths
Design, base, formwork, reinforcement, a recorded pre-pour check, pour, finish, joints, cure and coat, under one scope and one accountable team.
See how we do it
The SOAKD Standard
What we will not do on your concrete
-
We don't spray without protecting the property.
Solar panels, fixtures and surrounding exposures are masked and controlled.
-
We don't spray when overspray cannot be controlled.
Weather, wind and neighbouring exposures determine the go/no-go decision.
-
We don't stop at cleaning concrete.
We can design and install new concrete, restore existing concrete, and finish suitable surfaces with compatible coloured and protective coating systems.
-
We don't close major work without evidence.
We photograph, inspect, sign off and document the completed project.
How every job runs
The SOAKD Pathway. Five stages, every job.
Every roof and every slab goes through the same five stages, with recorded hold points between them. Nothing moves past a hold point until it has been checked.
- 01
Diagnose
Inspect accessible areas, photograph them and name the condition.
- 02
Decide
Repair, restore, replace or build new - the pathway the condition calls for.
- 03
Deliver
Fix the substrate first. Finish second.
- 04
Defend
Protect everything around the work, and protect the finished surface.
- 05
Document
Evidence, not assurances.
Concrete guides
Before you get quotes
- Spray-on resurfacing, painting or a new pour: the three ways to fix a tired drivewaySpray-on resurfacing, paint or a new pour? How to choose the right fix for a tired concrete driveway on the Central Coast, Newcastle and Sydney.
- Can you resurface a cracked driveway? Reading the cracks before you coat themCan you resurface a cracked driveway? What each crack type says about the slab, NSW reactive clay and coastal sand, and when to replace instead.
- Exposed aggregate vs plain concrete: choosing a driveway finish for the Central Coast and NewcastleExposed aggregate vs plain concrete for a new driveway on the Central Coast and Newcastle. Finish, grip, upkeep, public costs and a resurfaced option.
FAQ
Concrete questions
Something not covered here? Call Daniel or request a free inspection and ask on site.
What concrete services does SOAKD Roof & Concrete offer?
New concrete driveways, paths, slabs, patios, courtyards and hardstands; restoration and sealing of existing concrete including crack and surface repairs; and resurfacing and protective coating systems, including decorative, coloured and slip-resistant finishes where the surface is suitable.
Is a resurfaced driveway just painted?
No. A resurfacing overlay is a cementitious system applied over prepared concrete. A paint is a thin coating. They behave differently and suit different conditions, and we never describe a painted surface as a resurfacing overlay. Every quote names the actual system being installed.
Can every driveway be resurfaced?
No. Resurfacing suits a slab that is structurally sound. Cracks from active movement, sunken sections or a slab breaking up usually mean the affected area needs repair or replacement first. We read the cracks and the condition before recommending a coating.
Do you clean concrete?
Cleaning is a preparation stage before restoration, sealing or coating. It is not a standalone service in this division. Contamination, old coatings and moisture have to be dealt with before anything goes on, or the new finish will not bond.
Can you pour new concrete and coat it as one job?
Yes. Design, install and coat can be scoped as one job: subgrade and base, formwork and reinforcement, a pre-pour check, the pour and finish, curing, a coating-readiness check and then the coating. One team is accountable for all of it.
Free inspection
Request a free inspection
Tell us what you are seeing. We inspect accessible areas, photograph what we find and explain the pathway the condition calls for before any price is discussed.
- 1
Tell us what you are seeing
Two minutes. Roof, concrete or both.
- 2
We inspect and photograph
Accessible areas, every finding photographed.
- 3
You get the pathway in writing
Repair, restore, replace or build new, with the system named.
Storm damage or water coming in now?
0468 029 068One number for inspections, quotes and make-safes.