Skip to content

Homeowners and investors

Roof and driveway work for homeowners and property investors

Homeowners and investors should have the roof and concrete diagnosed before choosing a quote. A sound roof with failed pointing or coating usually suits restoration. Widespread breakage, failed battens or asbestos point to replacement. We inspect for free, write the pathway into a scope that names the system, and close the work with a photographed completion report.

  • Free inspection
  • Every finding photographed
  • Written scope, system named
Concrete tile roof part-way through restoration, primed on one side, with the solar array masked in plastic

What homeowners and investors need from roof and concrete work

Your roof and your driveway are two of the largest surfaces you own. You are the one who lives with the result, or answers to the tenant, the agent or the buyer. The work should be decided by the condition of each surface, done in the right order and recorded so you can show what was done.

What goes wrong is familiar. Three quotes give three different answers: paint it, restore it, replace it. A fresh coat goes over broken tiles or a damp slab and looks fine until the next heavy rain. A roofer, a concreter and a coater each blame the other when the finish fails, and none of them leaves a record.

We work the other way. Every job follows the SOAKD Pathway. Diagnose, decide, deliver, defend, document.

Should you restore or replace your roof?

Restore a roof when the tiles or sheets are sound and the pointing, bedding or coating has failed. Replace it when tiles are failing across the roof, metal is rusted through, the battens or frame are compromised, or the roof contains asbestos. Age alone does not decide it.

Bedding is the mortar bed that holds the ridge caps in place. Pointing is the flexible compound over it that seals the joint. Battens are the strips of timber or steel the tiles are fixed to. When bedding and pointing fail, the caps loosen and water finds a way in. That is usually a repair or roof restoration problem, not a replacement one. When battens fail, it usually is.

We inspect the accessible areas of the roof, photograph what we find and write the pathway into the scope. If restoration is the wrong call, we say so and quote the replacement. Our guide to repairing, restoring or replacing a roof walks through the same decision.

One team for the roof and the driveway

Many homes need both. The roof is due for restoration and the driveway is cracked, stained or worn. We can diagnose both at the same inspection and scope each in writing, with its own system and hold points. A hold point is a stage where work stops until a check is passed, such as confirming the roof is dry before primer goes on.

On the ground, condition decides again. A sound slab with a worn surface may suit concrete resurfacing, where an overlay, a new thin wearing layer, or a coating goes over the existing concrete. A slab that has sunk, lifted or keeps cracking needs replacing. Each quote names the actual system, and a painted surface is never sold as a resurfacing overlay.

One scope also means one sequence. Where both are in the same scope, the roof is finished before the driveway is coated, so nothing from above lands on a new surface. One team answers for both.

Preparing a property for sale or lease

If you are selling or leasing, the roof and the driveway are in the first listing photographs and in the building inspection. Work that deals with the condition holds up to both. A coating over unrepaired defects does not, because a building inspector looks for the same broken tiles and failed pointing that a coat can hide for a season.

For investors, the aim is usually a sound roof and a presentable driveway without overcapitalising. We tell you what the condition calls for and what it does not. The scope lists inclusions and exclusions separately, so you can decide what to do now and what to plan for later.

If tenants are in the property, we work through you or your property manager on access and timing. The photographs let you see the work without being on site.

Roofs with solar panels

Solar panels change how a roof is restored, not whether it can be. Panels are either masked in place or temporarily removed and reinstalled by a licensed electrician, depending on the system and the access needed. Isolators, conduit and fixings are protected as well.

We do not spray near an unprotected array. If overspray cannot be adequately controlled, we do not spray. Our guide on restoring a roof with solar panels covers the questions to ask both trades.

Living at home while the work is done

You do not usually need to move out. Roof restorations, repairs and driveway work are normally done with the household in place. What changes is access and timing.

  • Coating days follow the weather. Coating goes ahead only when the surface is dry and the wind allows overspray to be controlled. We confirm each coating day the evening before.
  • Cars and the driveway need to be clear while concrete is prepared, poured or coated, and until the surface can take foot traffic and then vehicles. The scope gives the expected timing.
  • Your property and the neighbours’ are masked and protected before any spraying, including windows, paving, gardens and cars.
  • A replacement opens the roof, so the scope states how the house is protected while it is open.

What your scope and completion report give you

The scope is written before work starts. It states what is included and excluded, the assumptions made about the roof or slab, the repairs by location, the system by name, how the site is protected and what we need from you.

If something concealed turns up once work begins, we stop, photograph it and send a written variation. Nothing proceeds without your approval.

The completion report closes the work. It records the condition found, the pathway chosen, the system installed, the hold-point records, before, during and after photographs and the maintenance pathway from here. You keep it, and you can hand it to a buyer, an agent or a property manager.

What to ask any roof or concrete contractor

Whoever you choose, ask these questions before you sign.

  1. What condition did you find, and can I see the photographs?
  2. Is this a repair, a restoration or a replacement, and why?
  3. Which repairs happen before any coating goes on?
  4. Which system will you use, by name, and how many coats?
  5. What is excluded, and what happens if you find something concealed?
  6. How will you protect the solar panels, cars, gardens and the neighbours’ property?
  7. When will you not spray, and who makes that call?
  8. What will I receive when the job is finished?
  9. Can I see your licence and insurance details for this work, so I can check them?

A contractor who can answer all nine in writing has diagnosed your property. One who can only give a price has not.

Book a free inspection

We work with homeowners and investors across the Central Coast, Lake Macquarie, Newcastle and Sydney. The inspection is free. Request an inspection or call 0468 029 068.

How every job runs

The SOAKD Pathway. Five stages, every job.

Every roof and every slab goes through the same five stages, with recorded hold points between them. Nothing moves past a hold point until it has been checked.

  1. 01

    Diagnose

    Inspect accessible areas, photograph them and name the condition.

  2. 02

    Decide

    Repair, restore, replace or build new - the pathway the condition calls for.

  3. 03

    Deliver

    Fix the substrate first. Finish second.

  4. 04

    Defend

    Protect everything around the work, and protect the finished surface.

  5. 05

    Document

    Evidence, not assurances.

See the hold points at each stage

Evidence, not assurances

Every major job closes with a completion report you keep.

Anyone can say the job was done properly. The completion report shows it: what was found, what was done, what went on and when, with the photographs to prove each stage.

How we document every project

Completion report

Document
  • The condition we found, with photographs
  • The pathway chosen and why
  • The system installed, by name
  • Hold-point records with dates
  • Before, during and after photographs
  • QA sign-off
  • The maintenance pathway from here

FAQ

Residential: your questions

Something not covered here? Call Daniel or request a free inspection and ask on site.

Should I restore or replace my roof?

Condition decides it, not age. A roof with sound tiles or sheets and failed pointing, bedding or coating usually suits restoration. Widespread tile breakage, rust through the sheets, sagging, failed battens or asbestos usually point to replacement. Our free inspection photographs the condition, and the written scope states which pathway it supports and why, so you can compare quotes on the same facts.

Can one company do my roof and my driveway?

Yes. We repair, restore and replace roofs, and we design, install, restore and resurface concrete driveways and paths. Both can be diagnosed at the same inspection and scoped in writing, each with its own named system and hold points. You deal with one accountable team rather than a roofer, a concreter and a coater who each point to the other when something goes wrong.

Is it worth fixing the roof before I sell my house?

It depends on the roof's condition and what a buyer's building inspection is likely to find. Broken tiles and failed pointing show up in an inspection whether or not the roof has been painted. Repairs that deal with the condition, backed by a photographed completion report, give your agent and buyers a record of what was done. A coating over unrepaired defects does not.

Can my roof be restored if it has solar panels?

Usually, yes. The panels are either masked in place or temporarily removed and reinstalled by a licensed electrician, depending on the system and the access needed. Isolators, conduit and fixings are protected as well. If overspray cannot be adequately controlled around the array, we do not spray. The scope states which approach applies and who is responsible for each step.

Do I need to move out while the work is done?

Usually not. Roof restorations, repairs and driveway work are normally done with the household in place. On coating days we ask you to move cars and keep pets away from the work area, and a new or coated driveway is out of use until it can take foot traffic and then vehicles. The scope sets out the sequence, and we confirm each coating day the evening before.

My investment property has tenants. How does access work?

We work through you or your property manager. The property manager usually arranges notice and access with the tenants, and the scope sets out the days we need the roof, the driveway or the yard. The photographed inspection and the completion report can be sent to you and your property manager, so you can see the condition and the finished work without being on site.

Free inspection

Request a free inspection

Tell us what you are seeing. We inspect accessible areas, photograph what we find and explain the pathway the condition calls for before any price is discussed.

  1. 1

    Tell us what you are seeing

    Two minutes. Roof, concrete or both.

  2. 2

    We inspect and photograph

    Accessible areas, every finding photographed.

  3. 3

    You get the pathway in writing

    Repair, restore, replace or build new, with the system named.

Storm damage or water coming in now?

0468 029 068

One number for inspections, quotes and make-safes.

Free inspection

What would you like us to look at?

What would you like us to look at? (required)

Prefer to talk? 0468 029 068

Free inspection