Shieldcoat systems
The Shieldcoat coating systems we use on roofs and concrete
We coat roofs and concrete with Shieldcoat systems. Shieldcoat, based in Brisbane, describes itself as an Australian, family-owned manufacturer of roof, concrete and protective coatings. Using one manufacturer's system from cleaner to topcoat means the primer and topcoat are made to work together, and every product has a data sheet that sets out how it must be applied. Your quote names each product and the number of coats.
- Free inspection
- Every finding photographed
- Written scope, system named
How a coating system fits together
A roof or slab coating is a system of layers, applied in order. Each layer has a job, and the one you see is the last.
- Prepare. The surface is cleaned as preparation, mould and lichen are treated, and repairs are made.
- Prime or seal. A primer chosen for the surface makes the topcoat bond and blocks what the substrate would push through it.
- Topcoat. The colour, applied at the thickness and number of coats the data sheet sets.
The products below are the ones we choose from. Each name links to Shieldcoat's own page for it, where the technical data sheet sits. To pick a colour, use the roof paint colours, driveway paint colours or spraycrete fleck charts.
Roof systems
Roof preparation
Mould, lichen and grime are treated before anything is primed, because a coating only bonds to a clean, sound surface.
- Mouldshield C (Shieldcoat website)
A concentrated cleaner for mould, fungi, grease and oil on roofs, concrete and walls before coating.
- Mouldshield K (Shieldcoat website)
A strong mould and lichen treatment for tile roofs, used before priming.
Roof primers and sealers
The primer is chosen for the roof, not the colour. Tile age, porosity, glaze and rust all change which one is right.
- Shieldseal W (Shieldcoat website)
A clear penetrating primer for newer, non-porous concrete tiles and unglazed terracotta.
- Shieldseal CT401 (Shieldcoat website)
A primer sealer for aged concrete tiles, made to stop the calcium salts that leach out of old tiles and fade a topcoat early.
- Fillabond (Shieldcoat website)
A high-build primer undercoat that fills porous, pitted and worn concrete tiles.
- Shieldseal Ultimate Primer (Shieldcoat website)
A high-build primer sealer for very porous or degraded concrete tiles and aged terracotta.
- Shieldseal GTP (Shieldcoat website)
A water-based primer with adhesion promoters for terracotta tiles.
- Shieldseal W Plus (Shieldcoat website)
A primer for chalky COLORBOND® steel and other metal roofing that has never been painted.
- Rustshield W (Shieldcoat website)
A water-based rust-inhibiting primer sealer for metal roofs, used under the topcoat.
Roof topcoats
The topcoat is the colour you see and the layer that takes the weather. Shieldcoat calls its main roof topcoats membranes.
- Roofbond Roof Membrane (Shieldcoat website)
A 100% acrylic membrane for tile and metal roofs in 45 standard colours, in gloss, semi-gloss or low sheen.
- NanoBond Roof Membrane (Shieldcoat website)
A three-coat roof membrane system in the same 45 standard colours, made for colour retention.
- Thermobond HRC (Shieldcoat website)
A heat reflective roof coating in Arctic White and 11 other pale shades, for tile and metal roofs.
- Thermobond IR (Shieldcoat website)
A roof membrane with infra-red reflective pigments, so darker colours absorb less of the sun's heat than a standard finish of the same colour.
- Rustshield AL (Shieldcoat website)
A self-priming topcoat for rusty metal roofs, applied without a separate primer.
Pointing and tile sealing
Ridge and hip capping is bedded and pointed before the roof is coated, so the topcoat goes over a sound ridge line.
- Roofbond Flexible Pointing (Shieldcoat website)
A flexible acrylic pointing compound for ridge and hip capping on concrete and terracotta tiles.
- Terrabond Terracotta Tile Sealer (Shieldcoat website)
A clear high-gloss acrylic sealer for terracotta tiles that are being kept in their natural colour.
Concrete systems
Concrete repair and primers
Cracks are repaired and the slab primed before any colour goes on. Colour does not hide a broken surface.
- Slab Repair (Shieldcoat website)
A flexible acrylic crack repair compound for concrete driveways, floors and masonry.
- Concrete Primer X (Shieldcoat website)
A solvent-based clear penetrating primer, used under Step Safe and Concreshield or on its own as a re-sealer.
- Step Safe WB Primer (Shieldcoat website)
A clear water-based concrete primer for Floorshield and Step Safe, including over sound water-based paint.
Concrete coatings and fleck finishes
All four coatings share Shieldcoat's 33-colour concrete range. Which one suits depends on the surface, the slope and the traffic.
- Concreshield (Shieldcoat website)
A coloured or clear solvent-based topcoat and sealer for driveways, garages, carports and pool areas, in gloss or low sheen.
- Floorshield (Shieldcoat website)
A water-based acrylic urethane coating for concrete and timber floors.
- Step Safe Roll On (Shieldcoat website)
A roller-applied water-based anti-slip coating for paths, patios and pool surrounds. Shieldcoat rates it P5 for slip resistance and does not list it for steep driveways.
- Step Safe Heavy Duty (Shieldcoat website)
A spray resin applied by hopper gun in two base coats, a fleck coat in two extra colours and two clear coats. Shieldcoat rates it P5, lists it for steep driveways and high-traffic areas, and sells it for professional application only.
- Anti-Slip Additive (Shieldcoat website)
Fine beads stirred into Concreshield or Floorshield. Shieldcoat rates the result P4 for slip resistance.
What your quote will say
- Each product by name, including the primer or sealer chosen for your surface
- The number of coats and the colour
- The repairs that come before any coating
- What the system does not cover, in plain words
Product details summarised from Shieldcoat's published product pages and data sheets. Shieldcoat and its product names belong to Shieldcoat Pty. Ltd. SOAKD Roof & Concrete is an independent business, not part of Shieldcoat. Read the full specifications at shieldcoat.com.au.
COLORBOND® and ® colour names are registered trade marks of BlueScope Steel Limited. ™ colour names are trade marks of BlueScope Steel Limited. SOAKD Roof & Concrete is not affiliated with or endorsed by BlueScope.
FAQ
Shieldcoat systems: your questions
Something not covered here? Call Daniel or request a free inspection and ask on site.
What is Shieldcoat?
Shieldcoat Pty. Ltd. is a manufacturer of roof coatings, concrete coatings and protective paints, based in Parkinson, Brisbane. It describes itself as Australian and family-owned, and says it has been making coatings for more than 25 years. It sells through distributors in Australia and overseas.
Why use one manufacturer's system?
An incompatible primer is a common reason a recoat peels. When the cleaner, primer and topcoat come from one system, they are made to work together, and the data sheets say exactly how each one is applied, how thick and in what conditions. That gives us a specification to work to and gives you something to check the job against.
Which Shieldcoat products will my roof need?
It depends on the roof. Concrete tiles, terracotta and metal each take a different primer, and the age and porosity of the surface narrows it further. We decide after the inspection and name every product on the quote, with the number of coats.
What about warranties on Shieldcoat products?
Shieldcoat sets its own product warranty terms, and they depend on how and by whom the product is applied. Before you sign, ask us which warranty, if any, applies to your job and what it covers, and we will answer in writing.
Can I buy Shieldcoat products and do it myself?
Some Shieldcoat products are sold through its distributors, and Shieldcoat publishes data sheets for each one. Others, such as Step Safe Heavy Duty, are sold for professional application only. Roof work also involves working at heights, so weigh that before you take it on.
Do you use Shieldcoat on every job?
We name the system on every quote. Where a job needs something outside the Shieldcoat range, such as COLORBOND® steel sheets on a roof replacement or concrete for a new driveway, the quote names that too.
Where can I read the Shieldcoat data sheets?
Shieldcoat publishes a technical data sheet for each product on its website. Each product below links to Shieldcoat's page for it, and you are welcome to read them before you decide.
Free inspection
Request a free inspection
Tell us what you are seeing. We inspect accessible areas, photograph what we find and explain the pathway the condition calls for before any price is discussed.
- 1
Tell us what you are seeing
Two minutes. Roof, concrete or both.
- 2
We inspect and photograph
Accessible areas, every finding photographed.
- 3
You get the pathway in writing
Repair, restore, replace or build new, with the system named.
Storm damage or water coming in now?
0468 029 068One number for inspections, quotes and make-safes.