Skip to content

Spraycrete fleck colours

Spraycrete colours and fleck finishes

A spray-on fleck finish, often called spraycrete, is a base colour with a fleck coat in two extra colours. For fleck finishes we spray Shieldcoat's Step Safe Heavy Duty, a spray resin that Shieldcoat rates P5 for slip resistance, and the base and both flecks come from its 33-colour concrete range. Shieldcoat publishes no fixed blends, so you choose the combination. Try one in the mixer below.

  • Free inspection
  • Every finding photographed
  • Written scope, system named

Build your fleck finish

Choose a base colour and two fleck colours, or start from an example. The starting points are our suggestions, not fixed blends.

Close-up of a spray-on fleck finish in the selected colours

Wallaby® base with Monument® and Shale Grey™ fleck On-screen guide only. Fleck density and size vary on the slab.

Starting points

Want a solid colour instead? See every colour as a swatch on the driveway paint colours chart.

How it goes on

How a spray-on fleck finish is applied

The order Shieldcoat specifies for Step Safe Heavy Duty, after the slab is ready.

  1. Repair and prepare

    Cracks and damaged areas are repaired, contamination and failed coatings are dealt with, and the slab is cleaned as preparation and left to dry.

  2. Prime

    A primer suited to the slab goes on so the spray coats bond.

  3. Spray the base colour

    Two coats of Step Safe Heavy Duty in the base colour are sprayed by hopper gun, which gives the textured surface.

  4. Spray the fleck coat

    The gun is set to a low pressure and the fleck coat goes on in the two fleck colours.

  5. Seal

    Two clear coats of Concreshield Clear Low Sheen seal the finish, as Shieldcoat specifies for the system.

Colour names and screen colours as published by Shieldcoat for its concrete range, and the system as described on its Step Safe and Step Safe Heavy Duty pages, checked November 2026. On-screen colours and the fleck pattern are approximate.

COLORBOND® and ® colour names are registered trade marks of BlueScope Steel Limited. ™ colour names are trade marks of BlueScope Steel Limited. SOAKD Roof & Concrete is not affiliated with or endorsed by BlueScope.

Concrete resurfacing Can you resurface a cracked driveway?

FAQ

Spraycrete: your questions

Something not covered here? Call Daniel or request a free inspection and ask on site.

What is spraycrete?

Spraycrete is a common name for spray-on concrete finishes. Some are cement-based overlays. The system we use for fleck finishes, Shieldcoat's Step Safe Heavy Duty, is a spray resin applied by hopper gun in a base colour, then a fleck coat in two more colours, then sealed with clear coats.

What colours does spraycrete come in?

With Step Safe Heavy Duty, the base and both fleck colours come from Shieldcoat's 33-colour concrete range, so there are thousands of possible combinations. Shieldcoat does not publish named blends. Popular directions are charcoal and grey flecks, sandstone tones and terracottas.

Is a spray-on fleck driveway slippery?

Shieldcoat rates Step Safe Heavy Duty P5 for slip resistance and lists it for steep driveways and high-traffic areas. Slip resistance also depends on the slope, shade and what ends up on the surface, so tell us how the driveway is used.

Can you spray over a cracked driveway?

Cracks are repaired first, and a coating does not fix a slab that is moving or breaking up. Repairs in an existing slab can still show through over time. Our guide on resurfacing a cracked driveway explains what can and cannot be fixed.

How do you stop overspray onto walls, cars and the neighbours?

Everything near the work is masked, and we check the wind before and during spraying. If overspray cannot be adequately controlled, we do not spray. A roller or trowel finish is used instead where the system allows.

Can you match my existing fleck finish?

We can get close by choosing the nearest base and fleck colours from the range, and Shieldcoat can tint close to other colours. A weathered finish rarely matches new coating exactly, so we show you before the whole area is done.

Free inspection

Request a free inspection

Tell us what you are seeing. We inspect accessible areas, photograph what we find and explain the pathway the condition calls for before any price is discussed.

  1. 1

    Tell us what you are seeing

    Two minutes. Roof, concrete or both.

  2. 2

    We inspect and photograph

    Accessible areas, every finding photographed.

  3. 3

    You get the pathway in writing

    Repair, restore, replace or build new, with the system named.

Storm damage or water coming in now?

0468 029 068

One number for inspections, quotes and make-safes.

Free inspection

What would you like us to look at?

What would you like us to look at? (required)

Prefer to talk? 0468 029 068

Free inspection